Is this bad Flooring

Jim

Member
Joined
Mar 26, 2016
Can anyone help here

 

acecard

Member
Joined
Sep 8, 2019
That's awful. Not watched the whole thing but those screws can't be biting on more than about 3mm of steel???.......I would be going from underneath, through the steel and into the battens that way, using hex coach screws, that way the flange will pull up nicely against the steel and the bulk of the thread would be in the batten. I would smear some Dow 791 around the base of the flange before screwing it in to seal it against the steel and seal out any water.
 

acecard

Member
Joined
Sep 8, 2019
Yep seen it on other site,lads a nut,thats why some folk are weary of buying self builds,and i can understand this.
Exactly why I wouldn't buy one myself....never know what the hell is underneath the lovely looking conversion you've just bought for 25k!!!
 
Top