Battery box body vent

BigStevie

Active Member
Joined
May 17, 2017
Location
Highlands
Need to put a vent on the body side of the Sprinter for the battery box, any suggestions as to what to use? I'm guessing I won't need a big vent....

Thanks, Steve
 

misterg

Active Member
Joined
Nov 7, 2017
Location
North Wales
Hi - I used a 3/4" stainless steel fuel tank vent, meant for boats. (Photo about 3/4 way down this post )

Vent needs to run up from the battery box to vent hydrogen. I opted for a very short vent running horizontally from the top of the box to try and avoid rain water running back down it (there is no vent / drain in the bottom of the box - I would have put one there if I could, but there was too much gubbins underneath).
 

BigStevie

Active Member
Joined
May 17, 2017
Location
Highlands
Just having a quick look on fleabay for the marine vent, there seems to be a lot to choose from, any pointers?

Stevie
 
Top