My Self-Build Citroen Relay L3H2


To be honest it was planned round the wheelchair by putting it in the back of the van and measuring the turning circle and isle width

The Base Vehicle

Citroen Relay L3 H2 2011 2.2 33,000 on the clock Ex council

The Build

GALLERY=media, 302]IMG_0240 (1) by tony b posted Feb 22, 2017 at 6:11 PM[/GALLERY]
The garage where I bought it removed the bulkhead for me.Did a round trip from Crewe to Castleford to have windows fitted then on to Doncaster for a new passenger seat via E bay then onto Derby for Wheelchair Ramp via Ebay
3 mm ply down first to level floor then 25mm roof battens,25mm celotex topped with 12mm ply.Bench seat removed new passenger seat and swivels fitted to both seats
Midi and Min Heki built up with 25mm battens and 12mm ply,25mm celotex and 6mm ply to finish
wheelchair ramp offset to allow enough width under the bed box for propex batteries ect
Very High on Alison's list
two hinge posts for the hoist one on each door pillar to hoist into bed and swivel chair[
View media item 411

Latest reviews

Great van to start with, but looking forward to seeing what you have managed to achieve for Allison inside, as there do not seem to be any pics other than your base vehicle and have already seen the lovely exterior treatment. Geoff.

Item information

Added by
tony b
Last update
5.00 star(s) 1 ratings

More in My Self-Build Motorhome